3D PRINTING

Stereolithography (SLA) is the most widely used rapid prototyping technology. It can produce highly accurate and detailed polymer parts. It was the first rapid prototyping process, introduced in 1988 by 3D Systems, Inc., based on work by inventor Charles Hull. It uses a low-power, highly focused UV laser to trace out successive cross-sections of a three-dimensional object in a vat of liquid photosensitive polymer. As the laser traces the layer, the polymer solidifies and the excess areas are lef...

Stereolithography (SLA or SL; also known as stereolithography apparatus, optical fabrication, photo-solidification, or resin printing) is a form of 3D Printing technology used for creating models, Prototypes, Patterns, and production of parts in a layer by layer fashion using Photopolymerization, a process by which light causes chains of molecules to link, forming polymers. Those polymers then make up the body of a t...

SLS 3D printing is when a laser is used to solidify and bond grains of plastic, ceramic, glass, metal or other materials into layers to produce a 3D object. It works like other additive manufacturing technologies in that it provides a print by building layers-upon-layers until the object is complete. Once the laser traces the pattern of each layer slice into the bed of powder, the bed lowers and another layer is traced and bonded on top of the previous. A major benefit of SLS 3D printing is that...

The additive fabrication technique of inkjet printing is based on the 2D printer technique of using a jet to deposit tiny drops of ink onto paper. In the additive process, the ink is replaced with thermoplastic and wax materials, which are held in a melted state. When printed, liquid drops of these materials instantly cool and solidify to form a layer of the part. For this reason, the process if often referred to as thermal phase change inkjet printing. Inkjet printing offers the advantages of e...

Fused Deposition Modeling (FDM) was developed by Stratasys in Eden Prairie, Minnesota. In this process, a plastic or wax material is extruded through a nozzle that traces the part's cross sectional geometry layer by layer. The build material is usually supplied in filament form, but some setups utilize plastic pellets fed from a hopper instead. The nozzle contains resistive heaters that keep the plastic at a temperature just above its melting point so that it flows easily through the nozzle ...

Direct Metal Laser Sintering (DMLS) was developed jointly by Rapid Product Innovations (RPI) and EOS GmbH, starting in 1994, as the first commercial rapid prototyping method to produce metal parts in a single process. With DMLS, metal powder (20 micron diameter), free of binder or fluxing agent, is completely melted by the scanning of a high power laser beam to build the part with properties of the original material. Eliminating the polymer binder avoids the burn-off and infiltration steps, and ...

Electrical Characteristics Operating Frequency Operating mode Reading Distance  Integrated circuit (IC) Type Memory Size : : : : : : 13.56 MHz, 125 KHz. Passive (without battery.) Depending on type of reader. NXP   Hitag -1,Hitag - 2,Hitag -S, I - Code. ( Read & Write ...

IBC provider and manufacturer of Tags. Our industrial tags are made of high performance, durable materials that can withstand harsh environments - both indoors and outdoors. They can be used for hazard warnings, valve identification, equipment instructions, accident prevention and more. ...

IBC provider and manufacturer of Tags. Our Key tags are made of high performance, durable materials that can withstand harsh environments - both indoors and outdoors. They can be used for hazard warnings, valve identification, equipment instructions, accident prevention and more. ...

PET Disc Tag is ideal for access control, security & logistics applications. These clear disc tags consist of an RFID E-unit laminated between two PET plastic sheets. It is available with different chips & memory Sizes. ...

This tag is designed for automatic fare collection systems. It is a durable and robust tag which can be recycled for multiple uses. ...

These RFID tags install quickly and securely into wooden pallets and containers, enabling accurate real-time tracking, and supplying organizations the data needed to optimize industrial processes, workflow and inventory management. Nail Tag devices are also used in forestry and research applications to tag living trees. Moisture resistance and stable performance across fluctuating temperatures ensure long-term performance. ...

These tags are specifically designed to work on metal surfaces and, in fact, use the metal to improve tag read performance.Our Metal Mount Tags are incredibly durable and can withstand both harsh environments and extreme temperatures due to their plastic shells. The tags can be mounted in multiple ways including screwing or bolting the tags, as well as through the use of adhesives.  ...

cycle tag is mounted on to a bicycle, helmet, or person. Whenever moving, the cycle unit advertises its presence regularly so that a vehicle’s sensors can detect its presence. When the bicycle is stationary for a while, the advertising transmissions stop. The rubber strap makes fitting and removal easy. ...

Our cylinder tags provide clear, on the spot information about cylinder contents. These tags are made of write-on economy polyester. Some options including perforations creating pull tabs that update the status between full, in use, and empty. Color-coded options are also available to help differentiate tanks that are ready to use from those that are not. ...