3D PRINTING

3D PRINTING

3d printing, technologies used in 3d printing, types of 3d printing, printers used for 3d printing, Call - 09810822688 or Mail - gm@indianbarcode.com

prod_img

The additive fabrication technique of inkjet printing is based on the 2D printer technique of using a jet to deposit tiny drops of ink onto paper. In the additive process, the ink is replaced with thermoplastic and wax materials, which are held in a melted state. When printed, liquid drops of these materials instantly cool and solidify to form a layer of the part. For this reason, the process if often referred to as thermal phase change inkjet printing. Inkjet printing offers the advantages of e...

prod_img

Fused Deposition Modeling (FDM) was developed by Stratasys in Eden Prairie, Minnesota. In this process, a plastic or wax material is extruded through a nozzle that traces the part's cross sectional geometry layer by layer. The build material is usually supplied in filament form, but some setups utilize plastic pellets fed from a hopper instead. The nozzle contains resistive heaters that keep the plastic at a temperature just above its melting point so that it flows easily through the nozzle ...

prod_img

Direct Metal Laser Sintering (DMLS) was developed jointly by Rapid Product Innovations (RPI) and EOS GmbH, starting in 1994, as the first commercial rapid prototyping method to produce metal parts in a single process. With DMLS, metal powder (20 micron diameter), free of binder or fluxing agent, is completely melted by the scanning of a high power laser beam to build the part with properties of the original material. Eliminating the polymer binder avoids the burn-off and infiltration steps, and ...

prod_img

Electrical Characteristics Operating Frequency Operating mode Reading Distance  Integrated circuit (IC) Type Memory Size : : : : : : 13.56 MHz, 125 KHz. Passive (without battery.) Depending on type of reader. NXP   Hitag -1,Hitag - 2,Hitag -S, I - Code. ( Read & Write ...

prod_img

IBC provider and manufacturer of Tags. Our industrial tags are made of high performance, durable materials that can withstand harsh environments - both indoors and outdoors. They can be used for hazard warnings, valve identification, equipment instructions, accident prevention and more. ...

prod_img

IBC provider and manufacturer of Tags. Our Key tags are made of high performance, durable materials that can withstand harsh environments - both indoors and outdoors. They can be used for hazard warnings, valve identification, equipment instructions, accident prevention and more. ...